CP: Steel and Aluminum Vent Sets
LOREN COOK COMPANY CP Series centrifugal vent sets offer durability and reliability in a self-contained package. The CP vent sets are ideal for low to medium volume and pressure applications and are available in a number of wheel options for maximum performance flexibility. All units are produced in an ISO 9001 certified facility and are listed by Underwriters Laboratory (UL 705) and UL Listed for Canada (cUL 705).
Construction Features include- Rotatable housing is standard on all models.
- Discharge flanges are standard on all belt drive models, except in downblast or bottom angular down discharge positions
See the Downloads tab for Specifications, Submittals, and FanDrafter files
See also CA / CF - Restaurant Upblast Centrifugal Roof Exhaust Ventilator
LOREN COOK COMPANY certifies that the CPV shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.
Type CPV is furnished standard with UL 705 and cUL 705 listings (Power Ventilator/ZACT) when furnished with factory supplied motor.
Type CPV is available with UL 762 listing (CUL 762) when furnished with factory supplied motor.
Up to size 300 available with express service. Read more.
CPV
Centrifugal Vent Set Blower
Backward Inclined Aluminum Wheel
Steel Housing
Belt Drive
- Utilizes a backward inclined flat blade, aluminum wheel and steel housing.
- Available in 20 belt drive sizes from 60 to 490. Performance ranges from 50 to 43400 CFM with static pressures from .250 to 2.5 inches.
Description: Fan shall be a single width, single inlet, backward inclined flat blade, belt driven centrifugal
vent set.
Certifications: Fan shall be manufactured at an ISO 9001 certified facility. Fan shall be listed by Underwriters Laboratories (UL/cUL 705) for US and Canada. For restaurant applications, fan shall be listed by Underwriters Laboratories (UL/cUL 762) for US and Canada. Fan shall bear the AMCA certified ratings seal for sound and air performance.
Construction: The fan shall be of bolted and welded construction utilizing corrosion resistant fasteners. The scroll wrapper shall be minimum 14 gauge steel and the scroll side panels shall be minimum 12 gauge steel. The entire fan housing shall have continuously welded seams for leakproof operation. A performance cut-off shall be furnished to prevent the recirculation of air in the fan housing. The fan housing shall be field rotatable to any one of eight discharge positions and shall have a minimum 1-1/2 inch outlet discharge flange. Bearing support shall be minimum 10 gauge welded steel. Side access inspection ports shall be provided with quick release latches for access to the motor compartment without removing the weather cover. Lifting lugs shall be provided for ease of installation. Unit shall bear an engraved aluminum nameplate. Nameplate shall indicate design CFM, static pressure, and maximum fan RPM. Unit shall be shipped in ISTA certified transit tested packaging..
Coating: Steel fan components shall be LorenizedTM with an electrostatically applied, baked polyester powder coating. Each component shall be subject to a five stage environmentally friendly wash system, followed by a minimum 2 mil thick baked powder finish. Paint must exceed 1,000 hour salt spray under ASTM B117 test method.
Wheel: Wheel shall be centrifugal backward inclined, constructed of 100% aluminum, including a precision machined cast aluminum hub. Wheel hub shall be keyed and securely attached to the fan shaft. Wheel inlet shall overlap an aerodynamic aluminum inlet cone to provide maximum performance and efficiency. Wheel shall be balanced in accordance with AMCA Standard 204-05, Balance Quality and Vibration Levels for Fans.
Motor: Motor shall be Nema design B with class B insulation rated for continuous duty and furnished at the specified voltage, phase and enclosure.
Blower Shaft: -Blower shaft shall be AISI C-1045 hot rolled and accurately turned, ground and polished. Shafting shall be sized for a critical speed of at least 125% of maximum RPM.
Bearings: Bearings shall be designed and tested specifically for use in air handling applications. Construction shall be heavy duty regreasable ball or roller type in a cast iron pillow block housing selected for a minimum L50 life in excess of 200,000 hours at maximum cataloged operating speed.
Belts and Drives: Belts shall be oil and heat resistant, static conducting. Drives shall be precision machined cast iron type, keyed and securely attached to the wheel and motor shafts. Drives shall be sized for 150% of the installed motor horsepower. The variable pitch motor drive must be factory set to the specified fan RPM.
Product - Fan shall be model CPV as manufactured by LOREN COOK COMPANY of Springfield, Missouri.
Dimensions (inches)
| Size | A | B | C | D | E | F | G | H** | J | K | L | M |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 60 | 7-9/16 | 10-15/16 | 14-1/8 | 18 | 22-1/4 | 12-3/4 | 9-3/8 | 25-1/4 | 10-3/4 | 10 | 10-1/4 | 13-1/8 |
| 70 | 7-9/16 | 10-15/16 | 14-1/8 | 18 | 22-1/4 | '12-3/4 | 9-3/8 | 25-1/4 | 10-3/4 | 10 | 10-1/4 | 13-1/8 |
| 80 | 7-9/16 | 10-15/16 | 14-1/8 | 18 | 22-1/4 | 12-3/4 | 9-3/8 | 25-1/4 | 10-3/4 | 10 | 10-1/4 | 13-1/8 |
| 100 | 7-9/16 | 10-15/16 | 14-1/8 | 18 | 22-1/4 | 12-3/4 | 9-3/8 | 25-1/4 | 10-3/4 | 10 | 10-1/4 | 13-1/8 |
| 120 | 9-3/16 | 13-1/8 | 16-1/8 | 18 | 24-13/16 | 13-3/8 | 9-3/8 | 26-1/4 | 12-3/8 | 10 | 11-7/8 | 13-1/8 |
| 135 | 10-5/16 | 14-3/4 | 17-5/8 | 18 | 26-11/16 | 13-7/8 | 9-3/8 | 27 | 13-1/2 | 12 | 13 | 15-1/8 |
| 150 | 11-7/16 | 16-7/16 | 19-1/8 | 19-1/16 | 29-9/16 | 15-5/16 | 9-3/8 | 29-1/16 | 14-5/8 | 12 | 14-1/8 | 15-1/8 |
| 165 | 12-5/8 | 18-1/16 | 21-3/16 | 20-7/16 | 32-1/16 | 16-3/8 | 9-3/8 | 31-7/16 | 15-13/16 | 12 | 15-5/16 | 15-1/8 |
| 180 | 13-3/4 | 19-11/16 | 22-11/16 | 22-1/16 | 34-3/4 | 17-5/8 | 10-3/8 | 33-9/16 | 16-15/16 | 12 | 16-7/16 | 15-1/8 |
| 195 | 14-15/16 | 21-5/16 | 24-3/16 | 23-11/16 | 36-5/16 | 17-13/16 | 10-3/8 | 35-11/16 | 18-3/16 | 15 | 17-5/8 | 18-1/8 |
| 210 | 16-1/16 | 23 | 25-15/16 | 25-3/8 | 39-15/16 | 20 | 11-3/8 | 38-7/8 | 19-5/16 | 15 | 18-3/4 | 18-1/8 |
| 225 | 17-3/16 | 24-5/8 | 27-7/16 | 27 | 42 | 20-5/8 | 11-7/8 | 41 | 20-7/16 | 15 | 19-7/8 | 18-1/8 |
| 245 | 18-3/4 | 26-13/16 | 29-7/16 | 29-5/8 | 45-1/16 | 21-3/4 | 13-3/8 | 44-5/8 | 23 | 15 | 21-11/16 | 18-1/8 |
| 270 | 20-5/8 | 29-9/16 | 31-15/16 | 32-3/8 | 49-1/16 | 23-3/8 | 14-3/8 | 48-7/8 | 24-7/8 | 18 | 23-9/16 | 21-1/8 |
| 300 | 22-15/16 | 32-13/16 | 34-15/16 | 35-5/8 | 54-3/8 | 25-7/8 | 15-5/16 | 53-5/8 | 27-3/16 | 18 | 26 | 21-3/16 |
| 330 | 25-1/4 | 36-1/8 | 37-15/16 | 38-7/8 | 59-13/16 | 28-7/16 | 16-13/16 | 58-3/8 | 29-7/16 | 18 | 28-5/16 | 21-3/16 |
| 365 | 27-7/8 | 39-15/16 | 41-7/16 | 42-3/4 | 66-1/8 | 31-7/16 | 17-13/16 | 64-1/4 | 32-1/16 | 21 | 30-15/16 | 24-3/16 |
| 402 | 30-3/4 | 44-1/16 | 45-3/16 | 46-3/4 | 72-15/16 | 34-11/16 | 19-13/16 | 70-1/4 | 34-15/16 | 21 | 34-5/16 | 24-3/16 |
| 445 | 34 | 48-11/16 | 49-7/16 | 51-3/8 | 80-9/16 | 38-5/16 | 21-13/16 | 76-7/8 | 38-3/16 | 25 | 37-9/16 | 28-3/16 |
| 490 | 37-7/16 | 53-5/8 | 55 | 56-1/4 | 88-3/4 | 42-3/16 | 23-13/16 | 84-1/4 | 41-5/8 | 25 | 41 | 28-3/16 |
| SizeFrame | N | P** | Q | R | S | T | U** | V** | W | X | Y | Z | *Max. Motor | Ship Wt. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 60 | 9-3/8 | 30-3/8 | 3 | 3/4 | 9/16 | 3/4 | 1-5/8 | 8 | 4 | 14-1/16 | 8-5/8 | 4-5/8 | 145T | 164 |
| 70 | 9-3/8 | 30-3/8 | 3 | 3/4 | 9/16 | 3/4 | 1-5/8 | 8 | 4 | 14-1/16 | 8-5/8 | 4-5/8 | 145T | 164 |
| 80 | 9-3/8 | 30-3/8 | 3 | 3/4 | 9/16 | 3/4 | 1-5/8 | 8 | 4 | 14-1/16 | 8-5/8 | 4-5/8 | 145T | 164 |
| 100 | 9-3/8 | 30-3/8 | 3 | 3/4 | 9/16 | 3/4 | 1-5/8 | 8 | 4 | 14-1/16 | 8-5/8 | 4-5/8 | 145T | 164 |
| 120 | 11 | 32-9/16 | 3 | 3/4 | 9/16 | 3/4 | 1-5/8 | 8 | 4 | 16-5/16 | 8-5/8 | 5-7/16 | 184T | 203 |
| 135 | 12-1/8 | 34-3/16 | 3 | 3/4 | 9/16 | 3/4 | 1-5/8 | 8 | 4 | 17-15/16 | 8-5/8 | 6 | 184T | 235 |
| 150 | 13-1/4 | 37-1/8 | 3 | 3/4 | 9/16 | 3/4 | 1-5/8 | 8 | 4 | 19-5/8 | 8-5/8 | 6-9/16 | 184T | 268 |
| 165 | 14-7/16 | 39-7/8 | 3 | 3/4 | 9/16 | 3/4 | 1-5/8 | 8 | 4 | 21-1/4 | 8-5/8 | 7-3/16 | 184T | 303 |
| 180 | 15-9/16 | 43-1/8 | 3 | 1 | 9/16 | 3/4 | 1-5/8 | 9 | 4 | 22-7/8 | 9-5/8 | 7-3/4 | 215T | 340 |
| 195 | 16-3/4 | 46-3/8 | 3 | 1 | 9/16 | 3/4 | 1-5/8 | 9 | 4 | 24-1/2 | 9-5/8 | 8-5/16 | 215T | 379 |
| 210 | 17-7/8 | 49-3/4 | 4 | 1 | 9/16 | 3/4 | 1-5/8 | 10 | 5 | 26-3/16 | 10-5/8 | 8-7/8 | 215T | 420 |
| 225 | 19 | 53 | 4 | 1 | 9/16 | 3/4 | 1-5/8 | 10 | 5 | 27-13/16 | 11-1/8 | 9-7/16 | 215T | 465 |
| 245 | 21-1/16 | 58-1/4 | 4 | 1 | 11/16 | 1 | 2-1/8 | 11-1/2 | 5 | 31 | 12-3/8 | 10-1/2 | 215T | 527 |
| 270 | 22-15/16 | 63-3/4 | 4 | 1 | 11/16 | 1 | 2-1/8 | 12-1/2 | 5 | 33-3/4 | 13-3/8 | 11-7/16 | 256T | 613 |
| 300 | 25-5/16 | 71-1/4 | 4 | 1-3/16 | 11/16 | 1 | 2-1/8 | 13-1/2 | 5 | 37 | 14-5/16 | 12-5/8 | 256T | 727 |
| 330 | 27-5/8 | 76-3/4 | 4 | 1-3/16 | 13/16 | 1 | 2-1/8 | 15 | 5 | 40-5/16 | 15-13/16 | 13-3/4 | 256T | 854 |
| 365 | 30-1/4 | 84-1/2 | 5 | 1-3/16 | 13/16 | 1 | 2-1/8 | 16 | 6 | 44-3/16 | 16-13/16 | 15-1/16 | 324T | 1021 |
| 402 | 34-1/8 | 92-1/2 | 5 | 1-7/16 | 13/16 | 1 | 2-1/8 | 18 | 6 | 48-5/16 | 18-13/16 | 17 | 324T | 1220 |
| 445 | 37-3/8 | 101-3/4 | 5 | 1-7/16 | 13/16 | 1 | 2-1/8 | 20 | 6 | 52-15/16 | 20-13/16 | 18-5/8 | 326T | 1486 |
| 490 | 40-13/16 | 111-1/2 | 5 | 1-7/16 | 13/16 | 1 | 2-1/8 | 22 | 6 | 57-7/8 | 22-13/16 | 20-3/8 | 326T | 1804 |
LOREN COOK COMPANY certifies that the CPS shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program.
Type CPS is furnished standard with UL 705 and cUL 705 listings (Power Ventilator/ZACT) when furnished with factory supplied motor.
Type CPS is available with UL 762 listing (CUL 762) when furnished with factory supplied motor.
Type CPS is also available with UL Power Ventilator for Smoke Control Systems Listing when furnished with factory supplied motor.
Up to size 300 are available with express service. Read more.
CPS
Centrifugal Vent Set Blower
Backward Inclined Wheel
Steel Construction
Belt Drive
- CPS utilizes a backward inclined flat blade, steel wheel and steel housing.
- Available in 20 belt drive sizes from 60 to 490. Performance ranges from 70 to 69600 CFM with static pressures from 1 to 8 inches.
Description: Fan shall be a single width, single inlet, backward inclined flat blade, belt driven centrifugal vent set.
Certifications: Fan shall be manufactured at an ISO 9001 certified facility. Fan shall be listed by Underwriters Laboratories (UL/cUL 705) for US and Canada. For restaurant applications, fan shall be listed by Underwriters Laboratories (UL/cUL 762) for US and Canada. For smoke control applications, fan shall be listed by Underwriters Laboratories (Power Ventilator for Smoke Control Systems) for US and Canada. Fan shall bear the AMCA certified ratings seal for air performance.
Construction: The fan shall be of bolted and welded construction utilizing corrosion resistant fasteners. The scroll wrapper shall be a minimum 14 gauge steel and the scroll side panels shall be a minimum 12 gauge steel. The entire fan housing shall have continuously welded seams for leakproof operation. A performance cut-off shall be furnished to prevent the recirculation of air in the fan housing. The fan housing shall be field rotatable to any one of eight discharge positions and shall have a minimum 1-1/2 inch outlet discharge flange. Bearing support shall be minimum 10 gauge welded steel. Side access inspection ports shall be provided with quick release latches for access to the motor compartment without removing the weather cover. Lifting lugs shall be provided for ease of installation. Unit shall bear an engraved aluminum nameplate. Nameplate shall indicate design CFM, static pressure, and maximum fan RPM. Unit shall be shipped in ISTA certified transit tested packaging.
Coating: Steel fan components shall be LorenizedTM with an electrostatically applied, baked polyester powder coating. Each component shall be subject to a five stage environmentally friendly wash system, followed by a minimum 2 mil thick baked powder finish. Paint must exceed 1,000 hour salt spray under ASTM B117 test method.
Wheel: Wheel shall be steel centrifugal backward inclined, non-overloading flat blade type. Blades shall be continuously welded to the backplate and deep spun inlet shroud. Wheel hub shall be keyed and securely attached to the fan shaft. Wheel inlet shall overlap an aerodynamic aluminum inlet cone to provide maximum performance and efficiency. Wheel shall be balanced in accordance with AMCA Standard 204-05, Balance Quality and Vibration Levels for Fans.
Motor: Motor shall be Nema design B with class B insulation rated for continuous duty and furnished at the specified voltage, phase and enclosure.
Blower Shaft: Bearings shall be designed and tested specifically for use in air handling applications. Construction shall be heavy duty regreasable ball or roller type in a cast iron pillow block housing selected for a minimum L50 life in excess of 200,000 hours at maximum cataloged operating speed.
Bearings: Bearings shall be designed and tested specifically for use in air handling applications. Construction shall be heavy duty regreasable ball or roller type in a cast iron pillow block housing selected for a minimum L50 life in excess of 200,000 hours at maximum cataloged operating speed.
Blower Shaft: Blower shaft shall be AISI C-1045 hot rolled and accurately turned, ground and polished. Shafting shall be sized for a critical speed of at least 125% of maximum RPM.
Belts and Drives: Belts shall be oil and heat resistant, static conducting. Drives shall be precision machined cast iron type, keyed and securely attached to the wheel and motor shafts. Drives shall be sized for 150% of the installed motor horsepower. The variable pitch motor drive must be factory set to the specified fan RPM.
Product: Fan shall be model CPS as manufactured by LOREN COOK COMPANY of Springfield, Missouri.
Dimensions (inches)
| Size | A | B | C | D | E | F | G | H | J | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Class I | Class II | Class I | Class II | Class I | Class II | |||||||
| 60 | 7-9/16 | 10-15/16 | 14-1/8 | 18 | - | 22-1/4 | 12-3/4 | 9-3/8 | - | 25-1/4 | - | 10-3/4 |
| 70 | 7-9/16 | 10-15/16 | 14-1/8 | 18 | 22-1/4 | 12-3/4 | '9-3/8 | 25-1/4 | 10-3/4 | |||
| 80 | 7-9/16 | 10-15/16 | 14-1/8 | 18 | 22-1/4 | 12-3/4 | '9-3/8 | 25-1/4 | 10-3/4 | |||
| 100 | 7-9/16 | 10-15/16 | 14-1/8 | 18 | 22-1/4 | 12-3/4 | 9-3/8 | 25-1/4 | 10-3/4 | |||
| 120 | 9-3/16 | 13-1/8 | 16-1/8 | 18 | 22 | 24-13/16 | 13-3/8 | 9-3/8 | 10-5/16 | 26-1/4 | 30-1/4 | 12-3/8 |
| 135 | 10-5/16 | 14-3/4 | 17-5/8 | 18 | 22 | 26-11/16 | 13-7/8 | 9-3/8 | 10-5/16 | 27 | 31 | 13-1/2 |
| 150 | 11-7/16 | 16-7/16 | 19-1/8 | 19-1/16 | 22 | 29-9/16 | 15-5/16 | 9-3/8 | 10-13/16 | 29-1/16 | 32 | 14-5/8 |
| 165 | 12/5/8 | 18-1/16 | 21-3/16 | 20-7/16 | 24 | 32-1/16 | 16-3/8 | 9-3/8 | 12-9/16 | 31-7/16 | 35 | 15-13/16 |
| 180 | 13-3/4 | 19-11/16 | 22-11/16 | 22-1/16 | 24 | 34-3/4 | 17-5/8 | 10-3/8 | 12-9/16 | 33-9/16 | 35-1/2 | 16-15/16 |
| 195 | 14-15/16 | 21-5/16 | 24-3/16 | 23-11/16 | 24-1/4 | 36-5/16 | 17-13/16 | 10-3/8 | 13-5/16 | 35-11/16 | 36-1/4 | 18-3/16 |
| 210 | 16-1/16 | 23 | 25-15/16 | 25-3/8 | 25-3/8 | 39-15/16 | 20 | 11-3/8 | 13-5/16 | 38-7/8 | 38-7/8 | 19-5/16 |
| 225 | 17-3/16 | 24-5/8 | 27-7/16 | 27 | 27 | 42 | 20-5/8 | 11-7/8 | 13-5/16 | 41 | 41 | 20-7/16 |
| 245 | 18-3/4 | 26-13/16 | 29-7/16 | 29-5/8 | 29-5/8 | 45-1/16 | 21-3/4 | 13-3/8 | 14-15/16 | 44-5/8 | 44-5/8 | 23 |
| 270 | 20-5/8 | 29-9/16 | 31-15/16 | 32-3/8 | 32-3/8 | 49-1/16 | 23-3/8 | 14-3/8 | 14-15/16 | 48-7/8 | 48-7/8 | 24-7/8 |
| 300 | 22-15/16 | 32-13/16 | 34-15/16 | 35-5/8 | 35-5/8 | 54-3/8 | 25-7/8 | 15-5/16 | 15-3/8 | 53-5/8 | 53-5/8 | 27-3/16 |
| 330 | 25-1/4 | 36-1/8 | 37-15/16 | 38-7/8 | 38-7/8 | 59-13/16 | 28-7/16 | 16-13/16 | 16-7/8 | 58-3/8 | 58-3/8 | 29-7/16 |
| 365 | 27-7/8 | 39-15/16 | 41-7/16 | 42-3/4 | 42-3/4 | 66-1/8 | 31-7/16 | 17-13/16 | 17-15/16 | 64-1/4 | 64-1/4 | 32-1/16 |
| 402 | 30-3/4 | 44-1/16 | 45-3/16 | 46-3/4 | 46-3/4 | 72-15/16 | 34-11/16 | 19-13/16 | 19-15/16 | 70-1/4 | 70-1/4 | 34-15/16 |
| 445 | 34 | 48-11/16 | 49-7/16 | 51-3/8 | 51-3/8 | 80-9/16 | 38-5/16 | 21-13/16 | 22 | 76-7/8 | 76-7/8 | 38-3/16 |
| 490 | 37-7/16 | 53-5/8 | 55 | 56-1/4 | 56-1/4 | 88-3/4 | 42-3/16 | 23-13/16 | 23-15/16 | 84-1/4 | 84-1/4 | 41-5/8 |
| Size Frame | K | L | M | N | P | Q | R | W | S | T | U | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Class I | Class II | Class I | Class II | Class I | Class II | Class I | Class II | |||||||
| 60 | 10 | - | 10-1/4 | 13-1/8 | - | 9-3/8 | 30-3/8 | - | 3 | 1 | - | 9-16/11 | 3-4/11 | 1-5/8 |
| 70 | 10 | 10-1/4 | 13-1/8 | 9-3/8 | 30-3/8 | 3 | 1 | 9-16/11 | 3-4/11 | 1-5/8 | ||||
| 80 | 10 | 10-1/4 | 13-1/8 | 9-3/8 | 30-3/8 | 3 | 1 | 9-16/11 | 3-4/11 | 1-5/8 | ||||
| 100 | 10 | 10-1/4 | 13-1/8 | 9-3/8 | 30-3/8 | 3 | 1 | 9-16/11 | 3-4/11 | 1-5/8 | ||||
| 120 | 10 | 18 | 11-7/8 | 13-1/8 | 21-1/8 | 11 | 32-9/16 | 36-9/16 | 3 | 1 | 1-7/16 | 9-16/11 | 3-4/11 | 1-5/8 |
| 135 | 12 | 18 | 13 | 15-1/8 | 21-1/8 | 12-1/8 | 34-3/16 | 38-3/16 | 3 | 1 | 1-7/16 | 9-16/11 | 3-4/11 | 1-5/8 |
| 150 | 12 | 18 | 14-1/8 | 15-1/8 | 21-1/8 | 13-1/4 | 37-1/8 | 40-1/16 | 3 | 1 | 1-7/16 | 9-16/11 | 3-4/11 | 1-5/8 |
| 165 | 12 | 22-1/8 | 15-5/16 | 15-1/8 | 25-1/4 | 14-7/16 | 39-7/8 | 43-7/16 | 3 | 1 | 1-7/16 | 9-16/11 | 3-4/11 | 1-5/8 |
| 180 | 12 | 22-1/8 | 16-7/16 | 15-1/8 | 25-1/4 | 15-9/16 | 43-1/8 | 45-1/16 | 3 | 1-3/16 | 1-11/16 | 9-16/11 | 3-4/11 | 1-5/8 |
| 195 | 15 | 22-1/8 | 17-5/8 | 18-1/8 | 25-1/4 | 16-3/4 | 46-3/8 | 46-15/16 | 3 | 1-3/16 | 1-11/16 | 9-16/11 | 3-4/11 | 1-5/8 |
| 210 | 15 | 22-1/8 | 18-3/4 | 18-1/8 | 25-1/4 | 17-7/8 | 49-3/4 | 49-3/4 | 4 | 1-7/16 | 1-11/16 | 9-16/11 | 3-4/11 | 1-5/8 |
| 225 | 15 | 22-1/8 | 19-7/8 | 18-1/8 | 25-1/4 | 19 | 53 | 53 | 4 | 1-7/16 | 1-11/16 | 9-16/11 | 3-4/11 | 1-5/8 |
| 245 | 15 | 24-1/8 | 21-11/16 | 18-1/8 | 27-5/16 | 21-1/16 | 58-1/4 | 58-1/4 | 4 | 1-11/16 | 1-15/16 | 11-16/11 | 1 | 2-1/8 |
| 270 | 18 | 24-1/8 | 23-9/16 | 21-1/8 | 27-5/16 | 22-15/16 | 63-3/4 | 63-3/4 | 4 | 1-11/16 | 1-15/16 | 11-16/11 | 1 | 2-1/8 |
| 300 | 18 | 26 | 26 | 21-3/16 | 29-3/16 | 25-5/16 | 71-1/4 | 71-1/4 | 4 | 1-15/16 | 2-3/16 | 11-16/11 | 1 | 2-1/8 |
| 330 | 18 | 26 | 28-5/16 | 21-3/16 | 29-3/16 | 27-5/8 | 76-3/4 | 76-3/4 | 4 | 1-15/16 | 2-3/16 | 13/16 | 1 | 2-1/8 |
| 365 | 21 | 26 | 30-15/16 | 24-3/16 | 29-1/4 | 30-1/4 | 84-1/2 | 84-1/2 | 5 | 2-3/16 | 2-7/16 | 13/16 | 1 | 2-1/8 |
| 402 | 21 | 26 | 34-5/16 | 24-3/16 | 29-1/4 | 34-1/8 | 92-1/2 | 92-1/2 | 5 | 2-3/16 | 2-7/16 | 13/16 | 1 | 2-1/8 |
| 445 | 25 | 26-5/8 | 37-9/16 | 28-3/16 | 29-7/8 | 37-3/8 | 101-3/4 | 101-3/4 | 5 | 2-7/16 | 2-15/16 | 13/16 | 1 | 2-1/8 |
| 490 | 25 | 30-7/8 | 41 | 28-3/16 | 34-1/8 | 40-13/16 | 111-1/2 | 111-1/2 | 5 | 2-7/16 | 2-15/16 | 4/5 | 1 | 2-1/8 |
| Size Frame | V | W | X | Y | Z | *Max. Motor | Ship Wt. |
||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Class I | Class II | Class I | Class II | Class I | Class II | Class I | Class II | ||||
| 60 | 8 | - | 4 | 14-1/16 | 8-5/8 | - | 4-5/8 | 145T | - | 173 | - |
| 70 | 8 | 4 | 14-1/16 | 8-5/8 | 4-5/8 | 145T | 173 | ||||
| 80 | 8 | 4 | 14-1/16 | 8-5/8 | 4-5/8 | 145T | 173 | ||||
| 100 | 8 | 4 | 14-1/16 | 8-5/8 | 4-5/8 | 145T | 173 | ||||
| 120 | 8 | 9 | 4 | 16-5/16 | 8-5/8 | 9-9/16 | 5-7/16 | 184T | 254T | 221 | 255 |
| 135 | 8 | 8-15/16 | 4 | 17-15/16 | 8-5/8 | 9-9/16 | 6 | 184T | 254T | 255 | 280 |
| 150 | 8 | 9-7/16 | 4 | 19-5/8 | 8-5/8 | 10-1/16 | 6-9/16 | 184T | 254T | 291 | 318 |
| 165 | 8 | 11-3/16 | 4 | 21-1/4 | 8-5/8 | 11-13/16 | 7-3/16 | 184T | 284T | 334 | 380 |
| 180 | 9 | 11-3/16 | 4 | 22-7/8 | 9-5/8 | 11-13/16 | 7-3/4 | 215T | 284T | 396 | 447 |
| 195 | 9 | 11-15/16 | 4 | 24-1/2 | 9-5/8 | 12-9/16 | 8-5/16 | 215T | 286T | 440 | 485 |
| 210 | 10 | 11-11/16 | 5 | 26-3/16 | 10-5/8 | 12-9/16 | 8-7/8 | 215T | 286T | 490 | 534 |
| 225 | 10-1/02 | 11-11/16 | 5 | 27-13/16 | 11-1/8 | 12-9/16 | 9-7/16 | 215T | 286T | 537 | 585 |
| 245 | 11-1/02 | 13 | 5 | 31 | 12-3/8 | 13-15/16 | 10-1/2 | 215T | 324T | 608 | 676 |
| 270 | 12-1/02 | 13 | 5 | 33-3/4 | 13-3/8 | 13-15/16 | 11-7/16 | 256T | 324T | 722 | 776 |
| 300 | 13-1/2 | 13-1/2 | 5 | 37 | 14-5/16 | 14-3/8 | 12-5/8 | 256T | 324T | 879 | 980 |
| 330 | 15 | 15 | 5 | 40-5/16 | 15-13/16 | 15-7/8 | 13-3/4 | 256T | 324T | 1035 | 1148 |
| 365 | 16 | 16 | 6 | 44-3/16 | 16-13/16 | 16-15/16 | 15-1/16 | 324T | 326T | 1230 | 1347 |
| 402 | 18 | 18 | 6 | 48-5/16 | 18-13/16 | 18-15/16 | 17 | 324T | 364T | 1519 | 1636 |
| 445 | 20 | 20-1/16 | 6 | 52-15/16 | 20-13/16 | 21 | 18-5/8 | 326T | 365T | 1938 | 2061 |
| 490 | 22 | 22 | 6 | 57-7/8 | 22-13/16 | 22-15/16 | 20-3/8 | 326T | 405T | 2319 | 2501 |
LOREN COOK COMPANY certifies that the CPA shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program.Type CPA is furnished standard with UL 705 listing (CUL 705) when furnished with factory supplied motor.
Type CPA is available with UL 762 listing (CUL 762) when furnished with factory supplied motor.
CPA
Centrifugal Vent Set Blower
Backward Inclined Wheel
Aluminum Wheel and Housing
Belt Drive
- CPA utilizes a backward inclined flat blade, aluminum wheel and aluminum housing.
- CPA is considered to be Spark Resistant Type A construction, see page 20 for details.
- Available in 20 belt drive sizes from 60 to 490. Performance ranges from 70 to 69600 CFM with static pressures from 1 to 8 inches.
Description: Fan shall be a single width, single inlet, backward inclined flat blade, belt driven centrifugal
vent set featuring spark resistant AMCA Type A construction.
Certifications: Fan shall be manufactured at an ISO 9001 certified facility. Fan shall be listed by Underwriters Laboratories (UL/cUL 705) for US and Canada. For restaurant applications, fan shall be listed by Underwriters Laboratories (UL/cUL762) for US and Canada. Fan shall bear the AMCA certified ratings seal for air performance.
Construction: The fan shall be of bolted and welded construction utilizing corrosion resistant fasteners. The scroll wrapper shall be minimum 0.100" aluminum and the scroll side panels shall be minimum 0.100" aluminum. The entire fan housing shall have continuously welded seams for leakproof operation. A performance cut-off shall be furnished to prevent the recirculation of air in the fan housing. The fan housing shall be field rotatable to any one of eight discharge positions and shall have a minimum 1-1/2 inch outlet discharge flange. Bearing support shall be minimum 10 gauge welded steel. Side access inspection ports shall be provided with quick release latches for access to the motor compartment without removing the weather cover. Lifting lugs shall be provided for ease of installation. Unit shall bear an engraved aluminum nameplate. Nameplate shall indicate design CFM, static pressure, and maximum fan RPM. Unit shall be shipped in ISTA certified transit tested packaging.
Coating: Steel fan components shall be LorenizedTM with an electrostatically applied, baked polyester powder coating. Each powder coated component shall be subject to a five stage environmentally friendly wash system, followed by a minimum 2 mil thick baked powder finish. Paint must exceed 1,000 hour salt spray under ASTM B117 test method.
Wheel: Wheel shall be aluminum centrifugal backward inclined, non-overloading flat blade type. Blades shall be continuously welded to the backplate and deep spun inlet shroud. Wheel hub shall be keyed and securely attached to the fan shaft. Wheel inlet shall overlap an aerodynamic aluminum inlet cone to provide maximum performance and efficiency. Wheel shall be balanced in accordance with AMCA Standard 204-05, Balance Quality and Vibration Levels for Fans.
Motor: Motor shall be Nema design B with class B insulation rated for continuous duty and furnished at the specified voltage, phase and enclosure.
Bearings: Bearings shall be designed and tested specifically for use in air handling applications. Construction shall be heavy duty regreasable ball or roller type in a cast iron pillow block housing selected for a minimum L50 life in excess of 200,000 hours at maximum cataloged operating speed.
Blower Shaft: Blower shaft shall be Type 316 Stainless Steel accurately turned, ground and polished. Shafting shall be sized for a critical speed of at least 125% of maximum RPM.
Product - Fan shall be model CPA as manufactured by LOREN COOK COMPANY of Springfield, Missouri.
Dimensions (Inches)
| Size | A | B | C | D | E | F | G | H | J | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Class I | Class II | Class I | Class II | Class I | Class II | |||||||
| 60 | 7-9/16 | 10-15/16 | 14-1/8 | 18 | - | 22-1/4 | 12-3/4 | 9-3/8 | - | 25-1/4 | - | 10-3/4 |
| 70 | 7-9/16 | 10-15/16 | 14-1/8 | 18 | 22-1/4 | 12-3/4 | 9-3/8 | 25-1/4 | 10-3/4 | |||
| 80 | 7-9/16 | 10-15/16 | 14-1/8 | 18 | 22-1/4 | 12-3/4 | 9-3/8 | 25-1/4 | 10-3/4 | |||
| 100 | 7-9/16 | 10-15/16 | 14-1/8 | 18 | 22-1/4 | 12-3/4 | 9-3/8 | 25-1/4 | 10-3/4 | |||
| 120 | 9-3/16 | 13-1/8 | 16-1/8 | 18 | 22 | 24-13/16 | 13-3/8 | 9-3/8 | 10-5/16 | 26-1/4 | 30-1/4 | 12-3/8 |
| 135 | 10-5/16 | 14-3/4 | 17-5/8 | 18 | 22 | 26-11/16 | 13-7/8 | 9-3/8 | 10-5/16 | 27 | 31 | 13-1/2 |
| 150 | 11-7/16 | 16-7/16 | 19-1/8 | 19-1/16 | 22 | 29-9/16 | 15-5/16 | 9-3/8 | 10-13/16 | 29-1/16 | 32 | 14-5/8 |
| 165 | 12-5/8 | 18-1/16 | 21-3/16 | 20-7/16 | 24 | 32-1/16 | 16-3/8 | 9-3/8 | 12-9/16 | 31-7/16 | 35 | 15-13/16 |
| 180 | 13-3/4 | 19-11/16 | 22-11/16 | 22-1/16 | 24 | 34-3/4 | 17-5/8 | 10-3/8 | 12-9/16 | 33-9/16 | 35-1/2 | 16-15/16 |
| 195 | 14-15/16 | 21-5/16 | 24-3/16 | 23-11/16 | 24-1/4 | 36-5/16 | 17-13/16 | 10-3/8 | 13-5/16 | 35-11/16 | 36-1/4 | 18-3/16 |
| 210 | 16-1/16 | 23 | 25-15/16 | 25-3/8 | 25-3/8 | 39-15/16 | 20 | 11-3/8 | 13-5/16 | 38-7/8 | 38-7/8 | 19-5/16 |
| 225 | 17-3/16 | 24-5/8 | 27-7/16 | 27 | 27 | 42 | 20-5/8 | 11-7/8 | 13-5/16 | 41 | 41 | 20-7/16 |
| 245 | 18-3/4 | 26-13/16 | 29-7/16 | 29-5/8 | 29-5/8 | 45-1/16 | 21-3/4 | 13-3/8 | 14-15/16 | 44-5/8 | 44-5/8 | 23 |
| 270 | 20-5/8 | 29-9/16 | 31-15/16 | 32-3/8 | 32-3/8 | 49-1/16 | 23-3/8 | 14-3/8 | 14-15/16 | 48-7/8 | 48-7/8 | 24-7/8 |
| 300 | 22-15/16 | 32-13/16 | 34-15/16 | 35-5/8 | 35-5/8 | 54-3/8 | 25-7/8 | 15-5/16 | 15-3/8 | 53-5/8 | 53-5/8 | 27-3/16 |
| 330 | 25-1/4 | 36-1/8 | 37-15/16 | 38-7/8 | 38-7/8 | 59-13/16 | 28-7/16 | 16-13/16 | 16-7/8 | 58-3/8 | 58-3/8 | 29-7/16 |
| 365 | 27-7/8 | 39-15/16 | 41-7/16 | 42-3/4 | 42-3/4 | 66-1/8 | 31-7/16 | 17-13/16 | 17-15/16 | 64-1/4 | 64-1/4 | 32-1/16 |
| 402 | 30-3/4 | 44-1/16 | 45-3/16 | 46-3/4 | 46-3/4 | 72-15/16 | 34-11/16 | 19-13/16 | 19-15/16 | 70-1/4 | 70-1/4 | 34-15/16 |
| 445 | 34 | 48-11/16 | 49-7/16 | 51-3/8 | 51-3/8 | 80-9/16 | 38-5/16 | 21-13/16 | 22 | 76-7/8 | 76-7/8 | 38-3/16 |
| 490 | 37-7/16 | 53-5/8 | 55 | 56-1/4 | 56-1/4 | 88-3/4 | 42-3/16 | 23-13/16 | 23-15/16 | 84-1/4 | 84-1/4 | 41-5/8 |
| Size | K | L | M | N | P | Q | R | S | T | U | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Class I | Class II | Class I | Class II | Class I | Class II | Class I | Class II | |||||||
| 60 | 10 | - | 10-1/04 | 13-1/8 | - | 9-3/8 | 30-3/8 | - | 3 | 1 | - | 9-16/11 | 3-4/11 | 1-5/8 |
| 70 | 10 | 10-1/04 | 13-1/8 | 9-3/8 | 30-3/8 | 3 | 1 | 9-16/11 | 3-4/11 | 1-5/8 | ||||
| 80 | 10 | 10-1/04 | 13-1/8 | 9-3/8 | 30-3/8 | 3 | 1 | 9-16/11 | 3-4/11 | 1-5/8 | ||||
| 100 | 10 | 10-1/04 | 13-1/8 | 9-3/8 | 30-3/8 | 3 | 1 | 9-16/11 | 3-4/11 | 1-5/8 | ||||
| 120 | 10 | 18 | 11-7/8 | 13-1/8 | 21-1/8 | 11 | 32-9/16 | 36-9/16 | 3 | 1 | 1-7/16 | 9-16/11 | 3-4/11 | 1-5/8 |
| 135 | 12 | 18 | 13 | 15-1/8 | 21-1/8 | 12-1/8 | 34-3/16 | 38-3/16 | 3 | 1 | 1-7/16 | 9-16/11 | 3-4/11 | 1-5/8 |
| 150 | 12 | 18 | 14-1/8 | 15-1/8 | 21-1/8 | 13-1/4 | 37-1/8 | 40-1/16 | 3 | 1 | 1-7/16 | 9-16/11 | 3-4/11 | 1-5/8 |
| 165 | 12 | 22-1/8 | 15-5/16 | 15-1/8 | 25-1/4 | 14-7/16 | 39-7/8 | 43-7/16 | 3 | 1 | 1-7/16 | 9-16/11 | 3-4/11 | 1-5/8 |
| 180 | 12 | 22-1/8 | 16-7/16 | 15-1/8 | 25-1/4 | 15-9/16 | 43-1/8 | 45-1/16 | 3 | 1/3/2016 | 1-11/16 | 9-16/11 | 3-4/11 | 1-5/8 |
| 195 | 15 | 22-1/8 | 17-5/8 | 18-1/8 | 25-1/4 | 16-3/4 | 46-3/8 | 46-15/16 | 3 | 1/3/2016 | 1-11/16 | 9-16/11 | 3-4/11 | 1-5/8 |
| 210 | 15 | 22-1/8 | 18-3/4 | 18-1/8 | 25-1/4 | 17-7/8 | 49-3/4 | 49-3/4 | 4 | 1/7/2016 | 1-11/16 | 9-16/11 | 3-4/11 | 1-5/8 |
| 225 | 15 | 22-1/8 | 19-7/8 | 18-1/8 | 25-1/4 | 19 | 53 | 53 | 4 | 1/7/2016 | 1-11/16 | 9-16/11 | 3-4/11 | 1-5/8 |
| 245 | 15 | 24-1/8 | 21-11/16 | 18-1/8 | 27-5/16 | 21-1/16 | 58-1/4 | 58-1/4 | 4 | 1/11/2016 | 1-15/16 | 11-16/11 | 1 | 2-1/8 |
| 270 | 18 | 24-1/8 | 23-9/16 | 21-1/8 | 27-5/16 | 22-15/16 | 63-3/4 | 63-3/4 | 4 | 1/11/2016 | 1-15/16 | 11-16/11 | 1 | 2-1/8 |
| 300 | 18 | 26 | 26 | 21-3/16 | 29-3/16 | 25-5/16 | 71-1/4 | 71-1/4 | 4 | 1/15/2016 | 2-3/16 | 11-16/11 | 1 | 2-1/8 |
| 330 | 18 | 26 | 28-5/16 | 21-3/16 | 29-3/16 | 27-5/8 | 76-3/4 | 76-3/4 | 4 | 1/15/2016 | 2-3/16 | 13/16 | 1 | 2-1/8 |
| 365 | 21 | 26 | 30-15/16 | 24-3/16 | 29-1/4 | 30-1/4 | 84-1/2 | 84-1/2 | 5 | 2/3/2016 | 2-7/16 | 13/16 | 1 | 2-1/8 |
| 402 | 21 | 26 | 34-5/16 | 24-3/16 | 29-1/4 | 34-1/8 | 92-1/2 | 92-1/2 | 5 | A | 2-7/16 | 13/16 | 1 | 2-1/8 |
| 445 | 25 | 26-5/8 | 37-9/16 | 28-3/16 | 29-7/8 | 37-3/8 | 101-3/4 | 101-3/4 | 5 | 2/7/2016 | 2-15/16 | 13/16 | 1 | 2-1/8 |
| 490 | 25 | 30-7/8 | 41 | 28-3/16 | 34-1/8 | 40-13/16 | 111-1/2 | 111-1/2 | 5 | 2/7/2016 | 2-15/16 | 13/16 | 1 | 2-1/8 |
| Size | V | W | X | Y | Z | Ship Wt. | Max. Motor | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Class I | Class II | Class I | Class II | Class I | Class II | Class I | Class II | ||||
| 60 | 8 | - | 4 | 14-1/16 | 8-5/8 | - | 4-5/8 | 145T | - | 118 | - |
| 70 | 8 | 4 | 14-1/16 | 8-5/8 | 4-5/8 | 145T | 118 | ||||
| 80 | 8 | 4 | 14-1/16 | 8-5/8 | 4-5/8 | 145T | 118 | ||||
| 100 | 8 | 4 | 14-1/16 | 8-5/8 | 4-5/8 | 145T | 118 | ||||
| 120 | 8 | 9 | 4 | 16-5/16 | 8-5/8 | 9-9/16 | 5-7/16 | 184T | 254T | 153 | 184 |
| 135 | 8 | 8-15/16 | 4 | 17-15/16 | 8-5/8 | 9-9/16 | 6 | 184T | 254T | 180 | 201 |
| 150 | 8 | 9-7/16 | 4 | 19-5/8 | 8-5/8 | 10-1/16 | 6-9/16 | 184T | 254T | 208 | 228 |
| 165 | 8 | 11-3/16 | 4 | 21-1/4 | 8-5/8 | 11-13/16 | 7-3/16 | 184T | 284T | 237 | 278 |
| 180 | 9 | 11-3/16 | 4 | 22-7/8 | 9-5/8 | 11-13/16 | 7-3/04 | 215T | 284T | 266 | 309 |
| 195 | 9 | 11-15/16 | 4 | 24-1/2 | 9-5/8 | 12-9/16 | 8-5/16 | 215T | 286T | 297 | 331 |
| 210 | 10 | 11-11/16 | 5 | 26-3/16 | 10-5/8 | 12-9/16 | 8-7/8 | 215T | 286T | 329 | 365 |
| 225 | 10-1/02 | 11-11/16 | 5 | 27-13/16 | 11-1/8 | 12-9/16 | 9-7/16 | 215T | 286T | 361 | 397 |
| 245 | 11-1/02 | 13 | 5 | 31 | 12-3/8 | 13-15/16 | 10-1/2 | 215T | 324T | 406 | 452 |
| 270 | 12-1/02 | 13 | 5 | 33-3/4 | 13-3/8 | 13-15/16 | 11-7/16 | 256T | 324T | 463 | 501 |
| 300 | 13-1/2 | 13-1/2 | 5 | 37 | 14-5/16 | 14-3/8 | 12-5/8 | 256T | 324T | 535 | 605 |
| 330 | 15 | 15 | 5 | 40-5/16 | 15-13/16 | 15-7/8 | 13-3/4 | 256T | 324T | 604 | 681 |
| 365 | 16 | 16 | 6 | 44-3/16 | 16-13/16 | 16-15/16 | 15-1/16 | 324T | 326T | 699 | 768 |
| 402 | 18 | 18 | 6 | 48-5/16 | 18-13/16 | 18-15/16 | 17 | 324T | 364T | 797 | 865 |
| 445 | 20 | 20-1/16 | 6 | 52-15/16 | 20-13/16 | 21 | 18-5/8 | 326T | 365T | 915 | 977 |
| 490 | 22 | 22 | 6 | 57-7/8 | 22-13/16 | 22-15/16 | 20-3/8 | 326T | 405T | 1044 | 1161 |
LOREN COOK COMPANY certifies that the CPS-A shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program. Certified sound rating data is available upon request. Refer to catalog LW-CA SWSI/DWDI, May 1991.Type CPS-A is furnished standard with UL 705 listing (CUL 705) when furnished with factory supplied motor.
Type CPS-A is available with UL Power Ventilator for Smoke Control Systems Listing when furnished with factory supplied motor.
All sizes are available with express service. Read more.
CPS-A
Centrifugal Vent Set Blower
Airfoil Wheel
Steel Construction
Belt Drive
- CPS-A utilizes a backward inclined airfoil blade, steel wheel and a steel housing
- Performance ranges from 700 to 74600 CFM with static pressures from 1 to 8 inches.
- Available in 16 sizes from 120 to 490.
Description: Fan shall be a single width, single inlet, backward inclined airfoil, belt driven centrifugal vent set.
Certifications: Fan shall be manufactured at an ISO 9001 certified facilty. Fan shall be listed by Underwriters Laboratories (UL/cUL 705) for US and Canada. For restaurant applications, fan shall be listed by Underwriters Laboratories (UL/cUL 762) for US and Canada. For smoke control applications, fan shall be listed by Underwriters Laboratories (Power Ventilator for Smoke Control Systems) for US and Canada. Fan shall bear the AMCA certified ratings seal for sound and air performance.
Construction: The fan shall be of bolted and welded construction utilizing corrosion resistant fasteners. The scroll wrapper shall be a minimum 14 gauge steel and the scroll side panels shall be a minimum 12 gauge steel. The entire fan housing shall have continuously welded seams for leakproof operation. A performance cut-off shall be furnished to prevent the recirculation of air in the fan housing. The fan housing shall be field rotatable to any one of eight discharge positions and shall have a minimum 1-1/2 inch outlet discharge flange. Bearing support shall be minimum 10 gauge welded steel. Side access inspection ports shall be provided with quick release latches for access to the motor compartment without removing the weather cover. Lifting lugs shall be provided for ease of installation. Unit shall bear an engraved aluminum nameplate. Nameplate shall indicate design CFM, static pressure, and maximum fan RPM. Unit shall be shipped in ISTA certified transit tested packaging.
Coating: Steel fan components shall be LorenizedTM with an electrostatically applied, baked polyester powder coating. Each component shall be subject to a five stage environmentally friendly wash system, followed by a minimum 2 mil thick baked powder finish. Paint must exceed 1,000 hour salt spray under ASTM B117 test method.
Wheel: Wheel shall be steel centrifugal airfoil blade type. Blades shall be continuously welded to the backplate and deep spun inlet shroud. Wheel hub shall be keyed and securely attached to the fan shaft. Wheel inlet shall overlap an aerodynamic aluminum inlet cone to provide maximum performance and efficiency. Wheel shall be balanced in accordance with AMCA Standard 204-05, Balance Quality and Vibration Levels for Fans.
Motor: Motor shall be Nema design B with class B insulation rated for continuous duty and furnished at the specified voltage, phase and enclosure.
Bearings: Bearings shall be designed and tested specifically for use in air handling applications. Construction shall be heavy duty regreasable ball or roller type in a cast iron pillow block housing selected for a minimum L50 life in excess of 200,000 hours at maximum cataloged operating speed.
Blower Shaft: Blower shaft shall be AISI C-1045 hot rolled and accurately turned, ground and polished. Shafting shall be sized for a critical speed of at least 125% of maximum RPM.
Belts and Drives: Belts shall be oil and heat resistant, static conducting. Drives shall be precision machined cast iron type, keyed and securely attached to the wheel and motor shafts. Drives shall be sized for 150% of the installed motor horsepower. The variable pitch motor drive must be factory set to the specified fan RPM.
Product: Fan shall be model CPS-A as manufactured by LOREN COOK COMPANY of Springfield, Missouri.
Dimensions (Inches)
| Size | A | B | C | D | E | F | G | H | J | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Class I | Class II | Class I | Class II | Class I | Class II | |||||||
| 120 | 9-3/16 | 13-1/8 | 16-1/8 | 18 | 22 | 24-13/16 | 13-3/8 | 9-3/8 | 10-5/16 | 26-1/4 | 30-1/4 | 12-3/8 |
| 135 | 10-5/16 | 14-3/4 | 17-5/8 | 18 | 22 | 26-11/16 | 13-7/8 | 9-3/8 | 10-5/16 | 27 | 31 | 13-1/2 |
| 150 | 1'1-7/16 | 16-7/16 | 19-1/8 | 19-1/16 | 22 | 29-9/16 | 15-5/16 | 9-3/8 | 10-13/16 | 29-1/16 | 32 | 14-5/8 |
| 165 | 12/5/208 | 18-1/16 | 21-3/16 | 20-7/16 | 24 | 32-1/16 | 16-3/8 | 9-3/8 | 12-9/16 | 31-7/16 | 35 | 15-13/16 |
| 180 | 13-3/4 | 19-11/16 | 22-11/16 | 22-1/16 | 24 | 34-3/4 | 17-5/8 | 10-3/8 | 12-9/16 | 33-9/16 | 35-1/2 | 16-15/16 |
| 195 | 14-15/16 | 21-5/16 | 24-3/16 | 23-11/16 | 24-1/4 | 36-5/16 | 17-13/16 | 10-3/8 | 13-5/16 | 35-11/16 | 36-1/4 | 18-3/16 |
| 210 | 16-1/16 | 23 | 25-15/16 | 25-3/8 | 25-3/8 | 39-15/16 | 20 | 11-3/8 | 13-5/16 | 38-7/8 | 38-7/8 | 19-5/16 |
| 225 | 17-3/16 | 24-5/8 | 27-7/16 | 27 | 27 | 42 | 20-5/8 | 11-7/8 | 13-5/16 | 41 | 41 | 20-7/16 |
| 245 | 18-3/4 | 26-13/16 | 29-7/16 | 29-5/8 | 29-5/8 | 45-1/16 | 21-3/4 | 13-3/8 | 14-15/16 | 44-5/8 | 44-5/8 | 23 |
| 270 | 20-5/8 | 29-9/16 | 31-15/16 | 32-3/8 | 32-3/8 | 49-1/16 | 23-3/8 | 14-3/8 | 14-15/16 | 48-7/8 | 48-7/8 | 24-7/8 |
| 300 | 22-15/16 | 32-13/16 | 34-15/16 | 35-5/8 | 35-5/8 | 54-3/8 | 25-7/8 | 15-5/16 | 15-3/8 | 53-5/8 | 53-5/8 | 27-3/16 |
| 330 | 25-1/4 | 36-1/8 | 37-15/16 | 38-7/8 | 38-7/8 | 59-13/16 | 28-7/16 | 16-13/16 | 16-7/8 | 58-3/8 | 58-3/8 | 29-7/16 |
| 365 | 27-7/8 | 39-15/16 | 41-7/16 | 42-3/4 | 42-3/4 | 66-1/8 | 31-7/16 | 17-13/16 | 17-15/16 | 64-1/4 | 64-1/4 | 32-1/16 |
| 402 | 30-3/4 | 44-1/16 | 45-3/16 | 46-3/4 | 46-3/4 | 72-15/16 | 34-11/16 | 19-13/16 | 19-15/16 | 70-1/4 | 70-1/4 | 34-15/16 |
| 445 | 34 | 48-11/16 | 49-7/16 | 51-3/8 | 51-3/8 | 80-9/16 | 38-5/16 | 21-13/16 | 22 | 76-7/8 | 76-7/8 | 38-3/16 |
| 490 | 37-7/16 | 53-5/8 | 55 | 56-1/4 | 56-1/4 | 88-3/4 | 42-3/16 | 23-13/16 | 23-15/16 | 84-1/4 | 84-1/4 | 41-5/8 |
| Size | K | L | M | N | P | Q | R | S | T | U | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Class I | Class II | Class I | Class II | Class I | Class II | Class I | Class II | |||||||
| 120 | 10 | 18 | 11-7/8 | 13-1/8 | 21-1/8 | 11 | 32-9/16 | 36-9/16 | 3 | 1 | 1-7/16 | 9/16 | 3/4 | 1-5/8 |
| 135 | 12 | 18 | 13 | 15-1/8 | 21-1/8 | 12-1/8 | 34-3/16 | 38-3/16 | 3 | 1 | 1-7/16 | 9/16 | 3/4 | 1-5/8 |
| 150 | 12 | 18 | 14-1/8 | 15-1/8 | 21-1/8 | 13-1/4 | 37-1/8 | 40-1/16 | 3 | 1 | 1-7/16 | 9/16 | 3/4 | 1-5/8 |
| 165 | 12 | 22-1/8 | 15-5/16 | 15-1/8 | 25-1/4 | 14-7/16 | 39-7/8 | 43-7/16 | 3 | 1 | 1-7/16 | 9/16 | 3/4 | 1-5/8 |
| 180 | 12 | 22-1/8 | 16-7/16 | 15-1/8 | 25-1/4 | 15-9/16 | 43-1/8 | 45-1/16 | 3 | 1-3/16 | 1-11/16 | 9/16 | 3/4 | 1-5/8 |
| 195 | 15 | 22-1/8 | 17-5/8 | 18-1/8 | 25-1/4 | 16-3/4 | 46-3/8 | 46-15/16 | 3 | 1-3/16 | 1-11/16 | 9/16 | 3/4 | 1-5/8 |
| 210 | 15 | 22-1/8 | 18-3/4 | 18-1/8 | 25-1/4 | 17-7/8 | 49-3/4 | 49-3/4 | 4 | 1-7/16 | 1-11/16 | 9/16 | 3/4 | 1-5/8 |
| 225 | 15 | 22-1/8 | 19-7/8 | 18-1/8 | 25-1/4 | 19 | 53 | 53 | 4 | 1-7/16 | 1-11/16 | 9/16 | 3/4 | 1-5/8 |
| 245 | 15 | 24-1/8 | 21-11/16 | 18-1/8 | 27-5/16 | 21-1/16 | 58-1/4 | 58-1/4 | 4 | 1-11/16 | 1-15/16 | 11/16 | 1 | 2-1/8 |
| 270 | 18 | 24-1/8 | 23-9/16 | 21-1/8 | 27-5/16 | 22-15/16 | 63-3/4 | 63-3/4 | 4 | 1-11/16 | 1-15/16 | 11/16 | 1 | 2-1/8 |
| 300 | 18 | 26 | 26 | 21-3/16 | 29-3/16 | 25-5/16 | 71-1/4 | 71-1/4 | 4 | 1-15/16 | 2-3/16 | 11/16 | 1 | 2-1/8 |
| 330 | 18 | 26 | 28-5/16 | 21-3/16 | 29-3/16 | 27-5/8 | 76-3/4 | 76-3/4 | 4 | 1-15/16 | 2-3/16 | 13/16 | 1 | 2-1/8 |
| 365 | 21 | 26 | 30-15/16 | 24-3/16 | 29-1/4 | 30-1/4 | 84-1/2 | 84-1/2 | 5 | 2-3/16 | 2-7/16 | 13/16 | 1 | 2-1/8 |
| 402 | 21 | 26 | 34-5/16 | 24-3/16 | 29-1/4 | 34-1/8 | 92-1/2 | 92-1/2 | 5 | 2-3/16 | 2-7/16 | 13/16 | 1 | 2-1/8 |
| 445 | 25 | 26-5/8 | 37-9/16 | 28-3/16 | 29-7/8 | 37-3/8 | 101-3/4 | 101-3/4 | 5 | 2-7/16 | 2-15/16 | 13/16 | 1 | 2-1/8 |
| 490 | 25 | 30-7/8 | 41 | 28-3/16 | 34-1/8 | 40-13/16 | 111-1/2 | 111-1/2 | 5 | 2-7/16 | 2-15/16 | 13/16 | 1 | 2-1/8 |
| Size | V | W | X | YClass IClass II | Z | Max. Motor | Ship Wt. | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Class I | Class II | Class I | Class II | Class I | Class II | ||||||
| 120 | 8 | 9 | 4 | 16-5/16 | 8-5/8 | 9-9/16 | 5-7/16 | 184T | 254T | 225 | 256 |
| 135 | 8 | 8-15/16 | 4 | 17-15/16 | 8-5/8 | 9-9/16 | 6 | 184T | 254T | 260 | 281 |
| 150 | 8 | 9-7/16 | 4 | 19-5/8 | 8-5/8 | 10-1/16 | 6-9/16 | 184T | 254T | 297 | 319 |
| 165 | 8 | 11-3/16 | 4 | 21-1/4 | 8-5/8 | 11-13/16 | 7-3/16 | 184T | 284T | 341 | 381 |
| 180 | 9 | 11-3/16 | 4 | 22-7/8 | 9-5/8 | 11-13/16 | 7-3/4 | 215T | 284T | 404 | 444 |
| 195 | 9 | 11-15/16 | 4 | 24-1/2 | 9-5/8 | 12-9/16 | 8-5/16 | 215T | 286T | 450 | 480 |
| 210 | 10 | 11-11/16 | 5 | 26-3/16 | 10-5/8 | 12-9/16 | 8-7/8 | 215T | 286T | 499 | 530 |
| 225 | 10-1/2 | 11-11/16 | 5 | 27-13/16 | 11-1/8 | 12-9/16 | 9-7/16 | 215T | 286T | 547 | 579 |
| 245 | 11-1/2 | 13 | 5 | 31 | 12-3/8 | 13-15/16 | 10-1/2 | 215T | 324T | 620 | 670 |
| 270 | 12-1/2 | 13 | 5 | 33-3/4 | 13-3/8 | 13-15/16 | 1'1-7/16 | 256T | 324T | 736 | 767 |
| 300 | 13-1/2 | 13-1/2 | 5 | 37 | 14-5/16 | 14-3/8 | 12/5/208 | 256T | 324T | 897 | 954 |
| 330 | 15 | 15 | 5 | 40-5/16 | 15-13/16 | 15-7/8 | 13-3/4 | 256T | 324T | 1056 | 1115 |
| 365 | 16 | 16 | 6 | 44-3/16 | 16-13/16 | 16-15/16 | 15-1/16 | 324T | 326T | 1277 | 1350 |
| 402 | 18 | 18 | 6 | 48-5/16 | 18-13/16 | 18-15/16 | 17 | 324T | 364T | 1556 | 1638 |
| 445 | 20 | 20-1/16 | 6 | 52-15/16 | 20-13/16 | 21 | 18-5/8 | 326T | 365T | 1984 | 2064 |
| 490 | 22 | 22 | 6 | 57-7/8 | 22-13/16 | 22-15/16 | 20-3/8 | 326T | 405T | 2375 | 2504 |
LOREN COOK COMPANY certifies that the CPA-A shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.
Type CPA-A is furnished standard with UL 705 listing (CUL 705) when furnished with factory supplied motor.
Type CPA-A is available with UL 762 listing (CUL 762) when furnished with factory supplied motor.
All sizes are available with express service. Read more.
CPA-A
Centrifugal Vent Set Blower
Airfoil Wheel
Aluminum Wheel and Housing
Belt Drive
- CPA-A utilizes a backward inclined airfoil blade, aluminum wheel and aluminum housing
- Available in 16 sizes from 120 to 490
Description: Fan shall be a single width, single inlet, backward inclined airfoil, belt driven centrifugal vent set featuring spark resistant AMCA Type A construction.
Certifications: Fan shall be manufactured at an ISO 9001 certified facility. Fan shall be listed by Underwriters Laboratories (UL/cUL 705) for US and Canada. For restaurant applications, fan shall be listed by Underwriters Laboratories (UL/cUL 762) for US and Canada. Fan shall bear the AMCA certified ratings seal for sound and air performance.
Construction: The fan shall be of bolted and welded construction utilizing corrosion resistant fasteners. The scroll wrapper shall be a minimum 0.100" aluminum and the scroll side panels shall be a minimum 0.100" aluminum. The entire fan housing shall have continuously welded seams for leakproof operation. A performance cut-off shall be furnished to prevent the recirculation of air in the fan housing. The fan housing shall be field rotatable to any one of eight discharge positions and shall have a minimum 1-1/2 inch outlet discharge flange. Bearing support shall be minimum 10 gauge welded steel. Side access inspection ports shall be provided with quick release latches for access to the motor compartment without removing the weather cover. Lifting lugs shall be provided for ease of installation. Unit shall bear an engraved aluminum nameplate. Nameplate shall indicate design CFM, static pressure, and maximum fan RPM. Unit shall be shipped in ISTA certified transit tested packaging.
Coating: Steel fan components shall be LorenizedTM with an electrostatically applied, baked polyester powder coating. Each powder coated component shall be subject to a five stage environmentally friendly wash system, followed by a minimum 2 mil thick baked powder finish. Paint must exceed 1,000 hour salt spray under ASTM B117 test method.
Wheel: Wheel shall be aluminum centrifugal airfoil blade type. Blades shall be continuously welded to the backplate and deep spun inlet shroud. Wheel hub shall be keyed and securely attached to the fan shaft. Wheel inlet shall overlap an aerodynamic aluminum inlet cone to provide maximum performance and efficiency. Wheel shall be balanced in accordance with AMCA Standard 204-05, Balance Quality and Vibration Levels for Fans.
Motor: Motor shall be Nema design B with class B insulation rated for continuous duty and furnished at the specified voltage, phase and enclosure.
Bearings: Bearings shall be designed and tested specifically for use in air handling applications. Construction shall be heavy duty regreasable ball or roller type in a cast iron pillow block housing selected for a minimum L50 life in excess of 200,000 hours at maximum cataloged operating speed.
Blower Shaft: Blower shaft shall be Type 316 Stainless Steel accurately turned, ground and polished. Shafting shall be sized for a critical speed of at least 125% of maximum RPM.
Belts and Drives: Belts shall be oil and heat resistant, static conducting. Drives shall be precision machined cast iron type, keyed and securely attached to the wheel and motor shafts. Drives shall be sized for 150% of the installed motor horsepower. The variable pitch motor drive must be factory set to the specified fan RPM.
Product: Fan shall be model CPA-A as manufactured by LOREN COOK COMPANY of Springfield, Missouri.
Dimensions (Inches)
| Size | A | B | C | D | E | F | G | H | J | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Class I | Class II | Class I | Class II | Class I | Class II | |||||||
| 120 | 9-3/16 | 13-1/8 | 16-1/8 | 18 | 22 | 24-13/16 | 13-3/8 | 9-3/8 | 10-5/16 | 26-1/4 | 30-1/4 | 12-3/8 |
| 135 | 10-5/16 | 14-3/4 | 17-5/8 | 18 | 22 | 26-11/16 | 13-7/8 | 9-3/8 | 10-5/16 | 27 | 31 | 13-1/2 |
| 150 | 11-7/16 | 16-7/16 | 19-1/8 | 19-1/16 | 22 | 29-9/16 | 15-5/16 | 9-3/8 | 10-13/16 | 29-1/16 | 32 | 14-5/8 |
| 165 | 12-5/8 | 18-1/16 | 21-3/16 | 20-7/16 | 24 | 32-1/16 | 16-3/8 | 9-3/8 | 12-9/16 | 31-7/16 | 35 | 15-13/16 |
| 180 | 13-3/4 | 19-11/16 | 22-11/16 | 22-1/16 | 24 | 34-3/4 | 17-5/8 | 10-3/8 | 12-9/16 | 33-9/16 | 35-1/2 | 16-15/16 |
| 195 | 14-15/16 | 21-5/16 | 24-3/16 | 23-11/16 | 24-1/4 | 36-5/16 | 17-13/16 | 10-3/8 | 13-5/16 | 35-11/16 | 36-1/4 | 18-3/16 |
| 210 | 16-1/16 | 23 | 25-15/16 | 25-3/8 | 25-3/8 | 39-15/16 | 20 | 11-3/8 | 13-5/16 | 38-7/8 | 38-7/8 | 19-5/16 |
| 225 | 17-3/16 | 24-5/8 | 27-7/16 | 27 | 27 | 42 | 20-5/8 | 11-7/8 | 13-5/16 | 41 | 41 | 20-7/16 |
| 245 | 18-3/4 | 26-13/16 | 29-7/16 | 29-5/8 | 29-5/8 | 45-1/16 | 21-3/4 | 13-3/8 | 14-15/16 | 44-5/8 | 44-5/8 | 23 |
| 270 | 20-5/8 | 29-9/16 | 31-15/16 | 32-3/8 | 32-3/8 | 49-1/16 | 23-3/8 | 14-3/8 | 14-15/16 | 48-7/8 | 48-7/8 | 24-7/8 |
| 300 | 22-15/16 | 32-13/16 | 34-15/16 | 35-5/8 | 35-5/8 | 54-3/8 | 25-7/8 | 15-5/16 | 15-3/8 | 53-5/8 | 53-5/8 | 27-3/16 |
| 330 | 25-1/4 | 36-1/8 | 37-15/16 | 38-7/8 | 38-7/8 | 59-13/16 | 28-7/16 | 16-13/16 | 16-7/8 | 58-3/8 | 58-3/8 | 29-7/16 |
| 365 | 27-7/8 | 39-15/16 | 41-7/16 | 42-3/4 | 42-3/4 | 66-1/8 | 31-7/16 | 17-13/16 | 17-15/16 | 64-1/4 | 64-1/4 | 32-1/16 |
| 402 | 30-3/4 | 44-1/16 | 45-3/16 | 46-3/4 | 46-3/4 | 72-15/16 | 34-11/16 | 19-13/16 | 19-15/16 | 70-1/4 | 70-1/4 | 34-15/16 |
| 445 | 34 | 48-11/16 | 49-7/16 | 51-3/8 | 51-3/8 | 80-9/16 | 38-5/16 | 21-13/16 | 22 | 76-7/8 | 76-7/8 | 38-3/16 |
| 490 | 37-7/16 | 53-5/8 | 55 | 56-1/4 | 56-1/4 | 88-3/4 | 42-3/16 | 23-13/16 | 23-15/16 | 84-1/4 | 84-1/4 | 41-5/8 |
| Size | K | L | M | N | P | Q | R | S | T | U | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Class I | Class II | Class I | Class II | Class I | Class II | Class I | Class II | |||||||
| 120 | 10 | 18 | 11-7/8 | 13-1/8 | 21-1/8 | 11 | 32-9/16 | 36-9/16 | 3 | 1 | 1-7/16 | 9/16 | 3/4 | 1-5/8 |
| 135 | 12 | 18 | 13 | 15-1/8 | 21-1/8 | 12-1/8 | 34-3/16 | 38-3/16 | 3 | 1 | 1-7/16 | 9/16 | 3/4 | 1-5/8 |
| 150 | 12 | 18 | 14-1/8 | 15-1/8 | 21-1/8 | 13-1/4 | 37-1/8 | 40-1/16 | 3 | 1 | 1-7/16 | 9/16 | 3/4 | 1-5/8 |
| 165 | 12 | 22-1/8 | 15-5/16 | 15-1/8 | 25-1/4 | 14-7/16 | 39-7/8 | 43-7/16 | 3 | 1 | 1-7/16 | 9/16 | 3/4 | 1-5/8 |
| 180 | 12 | 22-1/8 | 16-7/16 | 15-1/8 | 25-1/4 | 15-9/16 | 43-1/8 | 45-1/16 | 3 | 1-3/16 | 1-11/16 | 9/16 | 3/4 | 1-5/8 |
| 195 | 15 | 22-1/8 | 17-5/8 | 18-1/8 | 25-1/4 | 16-3/4 | 46-3/8 | 46-15/16 | 3 | 1-3/16 | 1-11/16 | 9/16 | 3/4 | 1-5/8 |
| 210 | 15 | 22-1/8 | 18-3/4 | 18-1/8 | 25-1/4 | 17-7/8 | 49-3/4 | 49-3/4 | 4 | 1-7/16 | 1-11/16 | 9/16 | 3/4 | 1-5/8 |
| 225 | 15 | 22-1/8 | 19-7/8 | 18-1/8 | 25-1/4 | 19 | 53 | 53 | 4 | 1-7/16 | 1-11/16 | 9/16 | 3/4 | 1-5/8 |
| 245 | 15 | 24-1/8 | 21-11/16 | 18-1/8 | 27-5/16 | 21-1/16 | 58-1/4 | 58-1/4 | 4 | 1-11/16 | 1-15/16 | 11/16 | 1 | 2-1/8 |
| 270 | 18 | 24-1/8 | 23-9/16 | 21-1/8 | 27-5/16 | 22-15/16 | 63-3/4 | 63-3/4 | 4 | 1-11/16 | 1-15/16 | 11/16 | 1 | 2-1/8 |
| 300 | 18 | 26 | 26 | 21-3/16 | 29-3/16 | 25-5/16 | 71-1/4 | 71-1/4 | 4 | 1-15/16 | 2-3/16 | 11/16 | 1 | 2-1/8 |
| 330 | 18 | 26 | 28-5/16 | 21-3/16 | 29-3/16 | 27-5/8 | 76-3/4 | 76-3/4 | 4 | 1-15/16 | 2-3/16 | 13/16 | 1 | 2-1/8 |
| 365 | 21 | 26 | 30-15/16 | 24-3/16 | 29-1/4 | 30-1/4 | 84-1/2 | 84-1/2 | 5 | 2-3/16 | 2-7/16 | 13/16 | 1 | 2-1/8 |
| 402 | 21 | 26 | 34-5/16 | 24-3/16 | 29-1/4 | 34-1/8 | 92-1/2 | 92-1/2 | 5 | 2-3/16 | 2-7/16 | 13/16 | 1 | 2-1/8 |
| 445 | 25 | 26-5/8 | 37-9/16 | 28-3/16 | 29-7/8 | 37-3/8 | 101-3/4 | 101-3/4 | 5 | 2-7/16 | 2-15/16 | 13/16 | 1 | 2-1/8 |
| 490 | 25 | 30-7/8 | 41 | 28-3/16 | 34-1/8 | 40-13/16 | 111-1/2 | 111-1/2 | 5 | 2-7/16 | 2-15/16 | 13/16 | 1 | 2-1/8 |
| Size | V | W | X | Y | Z | Max. Motor | Ship Wt. | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Class I | Class II | Class I | Class II | Class I | Class II | Class I | Class II | ||||
| 120 | 8 | 9 | 4 | 16-5/16 | 8-5/8 | 9-9/16 | 5-7/16 | 184T | 254T | 163 | 194 |
| 135 | 8 | 8-15/16 | 4 | 17-15/16 | 8-5/8 | 9-9/16 | 6 | 184T | 254T | 191 | 212 |
| 150 | 8 | 9-7/16 | 4 | 19-5/8 | 8-5/8 | 10-1/16 | 6-9/16 | 184T | 254T | 222 | 242 |
| 165 | 8 | 11-3/16 | 4 | 21-1/4 | 8-5/8 | 11-13/16 | 7-3/16 | 184T | 284T | 253 | 293 |
| 180 | 9 | 11-3/16 | 4 | 22-7/8 | 9-5/8 | 11-13/16 | 7-3/4 | 215T | 284T | 286 | 226 |
| 195 | 9 | 11-15/16 | 4 | 24-1/2 | 9-5/8 | 12-9/16 | 8-5/16 | 215T | 286T | 320 | 241 |
| 210 | 10 | 11-11/16 | 5 | 26-3/16 | 10-5/8 | 12-9/16 | 8-7/8 | 215T | 286T | 353 | 385 |
| 225 | 10-1/2 | 11-11/16 | 5 | 27-13/16 | 11-1/8 | 12-9/16 | 9-7/16 | 215T | 286T | 391 | 423 |
| 245 | 11-1/2 | 13 | 5 | 1/31/1900 | 12-3/8 | 13-15/16 | 10-1/2 | 215T | 324T | 442 | 483 |
| 270 | 12-1/2 | 13 | 5 | 33-3/4 | 13-3/8 | 13-15/16 | 11-7/16 | 256T | 324T | 505 | 536 |
| 300 | 13-1/2 | 13-1/2 | 5 | 37 | 14-5/16 | 14-3/8 | 12-5/8 | 256T | 324T | 585 | 644 |
| 330 | 15 | 15 | 5 | 40-5/16 | 15-13/16 | 15-7/8 | 13-3/4 | 256T | 324T | 670 | 733 |
| 365 | 16 | 16 | 6 | 44-3/16 | 16-13/16 | 16-15/16 | 15-1/16 | 324T | 326T | 783 | 843 |
| 402 | 18 | 18 | 6 | 48-5/16 | 18-13/16 | 18-15/16 | 17 | 324T | 364T | 898 | 965 |
| 445 | 20 | 20-1/16 | 6 | 52-15/16 | 20-13/16 | 21 | 18-5/8 | 326T | 365T | 1040 | 1101 |
| 490 | 22 | 22 | 6 | 57-7/8 | 22-13/16 | 22-15/16 | 20-3/8 | 326T | 405T | 1191 | 1307 |
LOREN COOK COMPANY certifies that the CPFB shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.Type CPFB is furnished standard with UL 705 listing (CUL 705) when furnished with factory supplied motor.
CPFB
Centrifugal Vent Set Blower
Forward Curve Wheel
Belt Drive
- Utilizes a forward curve, steel wheel and steel housing.
- Available in 8 belt drive sizes from 100 to 300. Performance ranges from 500 to 25000 CFM with static pressures from .125 to 3 inches.
Description: Fan shall be a single width, single inlet, forward curved, belt driven centrifugal vent set.
Certifications: Fan shall be manufactured at an ISO 9001 certified facility. Fan shall be listed by Underwriters Laboratories (UL/cUL 705) for US and Canada. Fan shall bear the AMCA certified ratings seal for sound and air performance.
Construction: The fan shall be of bolted and welded construction utilizing corrosion resistant
fasteners. The scroll wrapper shall be minimum 14 gauge steel and the scroll side
panels shall be minimum 12 gauge steel. The entire fan housing shall have
continuously welded seams for leakproof operation. The fan housing shall be field
rotatable to any one of eight discharge positions and shall have a minimum 1-1/2
inch outlet discharge flange. Bearing support shall be minimum 10 gauge welded
steel. Side access inspection ports shall be provided with quick release latches for
access to the motor compartment without removing the weather cover. Lifting lugs
shall be provided for ease of installation. Unit shall bear an engraved aluminum
nameplate. Nameplate shall indicate design CFM, static pressure, and maximum
fan RPM. Unit shall be shipped in ISTA certified transit tested packaging..
Coating: Steel fan components shall be LorenizedTM with an electrostatically applied, baked polyester powder coating. Each component shall be subject to a five stage environmentally friendly wash system, followed by a minimum 2 mil thick baked powder finish. Paint must exceed 1,000 hour salt spray under ASTM B117 test method.
Wheel: Wheel shall be centrifugal forward curved type. Wheel hub shall be keyed and securely attached to the fan shaft. Wheel shall utilize an aerodynamic aluminum inlet cone to provide maximum performance and efficiency. Wheel shall be balanced in accordance with AMCA Standard 204-05, Balance Quality and Vibration Levels for Fans.
Motor: Motor shall be Nema design B with class B insulation rated for continuous duty and furnished at the specified voltage, phase and enclosure.
Blower shaft: Blower shaft shall be AISI C-1045 hot rolled and accurately turned, ground and polished. Shafting shall be sized for a critical speed of at least 125% of maximum RPM.
Bearings: Bearings shall be designed and tested specifically for use in air handling applications. Construction shall be heavy duty regreasable ball or roller type in a cast iron pillow block housing selected for a minimum L50 life in excess of 200,000 hours at maximum cataloged operating speed.
Belts and Drives: Belts shall be oil and heat resistant, static conducting. Drives shall be precision machined cast iron type, keyed and securely attached to the wheel and motor shafts. Drives shall be sized for 150% of the installed motor horsepower. The variable pitch motor drive must be factory set to the specified fan RPM
Product: Fan shall be model CPFB as manufactured by LOREN COOK COMPANY of Springfield, Missouri.
Dimensions (Inches)
| Size | A | B | C | D | E | F | G | H | J | K | L | M | N |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 100 | 7-9/16 | 10-15/16 | 14-1/2 | 18 | 22-1/4 | 12-3/4 | 9-3/8 | 25-1/4 | 10-3/4 | 10 | 10-1/4 | 13-1/8 | 9-3/8 |
| 120 | 9-3/16 | 13-1/8 | 16-3/4 | 18 | 24-13/16 | 13-3/8 | 9-3/8 | 26-1/4 | 12-5/16 | 10 | 11-7/8 | 13-1/8 | 11 |
| 150 | 11-7/16 | 16-7/16 | 19-1/2 | 19-1/16 | 29-9/16 | 15-5/16 | 9-3/8 | 29-1/16 | 14-9/16 | 12 | 14-1/8 | 15-1/8 | 13-1/4 |
| 180 | 13-3/4 | 19-11/16 | 22-1/2 | 22-1/16 | 34-3/4 | 17-5/8 | 10-3/8 | 33-9/16 | 16-7/8 | 12 | 16-7/16 | 15-1/8 | 15-5/8 |
| 220 | 17-3/16 | 24-5/8 | 27-1/4 | 27 | 42 | 20-5/8 | 11-7/8 | 41 | 20-5/16 | 15 | 20 | 18-1/8 | 19-1/8 |
| 250 | 18-3/4 | 26-13/16 | 29-1/4 | 29-5/8 | 45-1/16 | 21-3/4 | 13-3/8 | 44-5/8 | 22-7/8 | 15 | 21-3/4 | 18-1/8 | 21-1/8 |
| 270 | 20-5/8 | 29-9/16 | 31-3/4 | 32-3/8 | 49-1/16 | 23-3/8 | 14-3/8 | 48-7/8 | 24-3/4 | 18 | 23-5/8 | 21-1/8 | 23 |
| 300 | 22-15/16 | 32-13/16 | 34-3/4 | 35-5/8 | 54-3/8 | 25-7/8 | 15-5/16 | 53-5/8 | 27-1/16 | 18 | 26 | 21-3/16 | 25-15/16 |
| Size | P | Q | R | S | T | U | V | W | X | Y | Z | *Max. Motor | Ship Wt. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 100 | 30-3/8 | 3 | 3/4 | 9/16 | 3/4 | 1-1/2 | 8-1/16 | 4-1/16 | 14-1/16 | 8-5/8 | 4-11/16 | 145T | 165 |
| 120 | 32-9/16 | 3 | 1 | 9/16 | 3/4 | 1-1/2 | 8-1/16 | 4-1/16 | 16-1/4 | 8-5/8 | 5-1/2 | 184T | 204 |
| 150 | 37-1/8 | 3 | 1 | 9/16 | 3/4 | 1-1/2 | 8-1/16 | 4-1/16 | 19-9/16 | 8-5/8 | 6-1/16 | 184T | 273 |
| 180 | 43-1/8 | 3 | 1 | 9/16 | 3/4 | 1-1/2 | 9-1/16 | 4-1/16 | 22-13/16 | 9-5/8 | 7-13/16 | 215T | 353 |
| 220 | 53 | 4 | 1-3/16 | 9/16 | 3/4 | 1-1/2 | 10-9/16 | 5-1/16 | 27-3/4 | 11-1/8 | 9-9/16 | 215T | 493 |
| 250 | 58-1/4 | 4 | 1-3/16 | 11/16 | 1 | 2 | 11-9/16 | 5-1/16 | 30-15/16 | 12-3/8 | 10-9/16 | 215T | 563 |
| 270 | 63-3/4 | 4 | 1-7/16 | 11/16 | 1 | 2 | 12-9/16 | 5-1/16 | 33-11/16 | 13-3/8 | 11-1/2 | 256T | 653 |
| 300 | 71-1/4 | 4 | 1-7/16 | 11/16 | 1 | 2 | 13-9/16 | 5-1/16 | 36-15/16 | 14-5/16 | 13 | 256T | 772 |
LOREN COOK COMPANY certifies that the CPFD shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program. Type CPFD is furnished standard with UL 705 listing (CUL 705) when furnished with factory supplied motor.
All sizes are available with express service. Read more.
CPFD
Centrifugal Vent Set Blower
Forward Curved Wheel
Direct Drive
- Arrangement 4 unit utilizing a forward curved, steel wheel and steel housing
- Available in 5 direct drive sizes from 6 to 12. Performance ranges from 250 to 2600 CFM with static pressures from .125 to 2 inches.
Description: Fan shall be a single width, single inlet, forward curved, direct driven centrifugal vent set.
Certifications: Fan shall be manufactured at an ISO 9001 certified facility. Fan shall be listed by Underwriters Laboratories (UL/cUL 705) for US and Canada. Fan shall bear the AMCA certified ratings seal for sound and air performance.
Construction: The fan shall be of bolted and welded construction utilizing corrosion resistant fasteners. The fan housing shall have air tight lock seams and shall be field rotatable to any one of eight discharge positions. Motor mount shall be minimum 14 gauge steel. Unit shall bear an engraved aluminum nameplate. Nameplate shall indicate design CFM and static pressure. Unit shall be shipped in ISTA certified transit tested packaging.
Coating: Steel fan components shall be LorenizedTM with an electrostatically applied, baked polyester powder coating. Each component shall be subject to a five stage environmentally friendly wash system, followed by a minimum 2 mil thick baked powder finish. Paint must exceed 1,000 hour salt spray under ASTM B117 test method.
Wheel: Wheel shall be centrifugal forward curved type. Wheel hub shall be securely attached to the motor shaft. Wheel shall utilize an aerodynamic inlet cone to provide maximum performance and efficiency. Wheel shall be balanced in accordance with AMCA Standard 204-05, Balance Quality and Vibration Levels for Fans.
Motor: Motor shall be heavy duty type with permanently lubricated sealed ball bearings and furnished at the specified voltage, phase and enclosure.
Product: Fan shall be model CPFD as manufactured by LOREN COOK COMPANY of Springfield, Missouri
imensions (Inches)
| Size | A | B | C Min. | C Max. | D Min. | D Max. | E | F | G | H | J | K | L | M Min | M Max. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6 | 13-1/2 | 18-1/2 | 15-1/4 | 15-3/4 | 7-5/8 | 8-1/8 | 7-7/8 | 4-5/8 | 5-3/4 | 12-1/2 | 10-3/4 | 1 | 4-5/8 | 2-7/8 | 3-5/8 |
| 7 | 13-1/2 | 20-1/4 | 18-1/8 | 18-5/8 | 10-1/8 | 10-5/8 | 8-3/8 | 5-3/8 | 6-1/8 | 12-1/2 | 12-1/4 | 1 | 7-1/8 | 2-7/8 | 3-5/8 |
| 9 | 14 | 21-3/4 | 20-1/2 | 20-1/2 | 11-1/8 | 11-1/8 | 9/7/8 | 5-7/8 | 7 | 12-3/4 | 13-3/4 | 1 | 7-5/8 | 3-3/8 | 4-5/8 |
| 10 | 15-1/2 | 22-1/4 | 23-15/16 | 24-15/16 | 13-3/8 | 14-3/8 | 11-3/8 | 6-3/8 | 8 | 14-1/4 | 13-3/4 | 1 | 9-7/8 | 3-3/8 | 4-5/8 |
| 12 | 17 | 22-3/4 | 26 | 27 | 13-3/8 | 14-3/8 | 13-3/8 | 5-7/8 | 9 | 15-3/4 | 14-1/4 | 1 | 9-7/8 | 3-3/8 | 4-5/8 |
| Size | N | P | Q | Ship Wt. |
|---|---|---|---|---|
| 6 | 7/16 | 7 | 1/2 | 17 |
| 7 | 7/16 | 7 | 5/8 | 22 |
| 9 | 9/16 | 9 | 3/4 | 32 |
| 10 | 9/16 | 9 | 1-1/16 | 44 |
| 12 | 9/16 | 12-1/2 | 1 | 61 |
Catalog
Manual
Specifications
Submittals
CPV- CPV CW THD ARR. 10 submittal
- CPV CCW THD ARR. 10 submittal
- CPV CW BHD ARR. 10 submittal
- CPV CCW BHD ARR. 10 submittal
- CPV CW BAU ARR. 10 submittal
- CPV CCW BAU ARR. 10 submittal
- CPV CW UBD ARR. 10 submittal
- CPV CCW UBD ARR. 10 submittal
- CPV CW TAU ARR. 10 submittal
- CPV CCW TAU ARR. 10 submittal
- CPV CW TAD ARR. 10 submittal
- CPV CCW TAD ARR. 10 submittal
- CPV CW DBD ARR. 10 submittal
- CPV CCW DBD ARR. 10 submittal
- CPV CW BAD ARR. 10 submittal
- CPV CCW BAD ARR. 10 submittal
- CPSLE submittal
- CPS-CPA CW THD ARR. 10 submittal
- CPS-CPA CCW THD ARR. 10 submittal
- CPS-CPA CW BHD ARR. 10 submittal
- CPS-CPA CCW BHD ARR. 10 submittal
- CPS-CPA CW BAU ARR. 10 submittal
- CPS-CPA CCW BAU ARR. 10 submittal
- CPS-CPA CW UBD ARR. 10 submittal
- CPS-CPA CCW UBD ARR. 10 submittal
- CPS-CPA CW TAU ARR. 10 submittal
- CPS-CPA CCW TAU ARR. 10 submittal
- CPS-CPA CW TAD ARR. 10 submittal
- CPS-CPA CCW TAD ARR. 10 submittal
- CPS-CPA CW DBD ARR. 10 submittal
- CPS-CPA CCW DBD ARR. 10 submittal
- CPS-CPA CW BAD ARR. 10 submittal
- CPS-CPA CCW BAD ARR. 10 submittal
- CPS-CPA CW THD ARR. 10 submittal
- CPS-CPA CCW THD ARR. 10 submittal
- CPS-CPA CW BHD ARR. 10 submittal
- CPS-CPA CCW BHD ARR. 10 submittal
- CPS-CPA CW BAU ARR. 10 submittal
- CPS-CPA CCW BAU ARR. 10 submittal
- CPS-CPA CW UBD ARR. 10 submittal
- CPS-CPA CCW UBD ARR. 10 submittal
- CPS-CPA CW TAU ARR. 10 submittal
- CPS-CPA CCW TAU ARR. 10 submittal
- CPS-CPA CW TAD ARR. 10 submittal
- CPS-CPA CCW TAD ARR. 10 submittal
- CPS-CPA CW DBD ARR. 10 submittal
- CPS-CPA CCW DBD ARR. 10 submittal
- CPS-CPA CW BAD ARR. 10 submittal
- CPS-CPA CCW BAD ARR. 10 submittal
- CPS-A/CPA-A CW TH ARR 10 CL I submittal
- CPS-A/CPA-A CCW THD ARR. 10 CL I submittal
- CPS-A/CPA-A CW BHD ARR. 10 CL I submittal
- CPS-A/CPA-A CCW BHD ARR. 10 CL I submittal
- CPS-A/CPA-A CW BAU ARR. 10 CL I submittal
- CPS-A/CPA-A CCW BAU ARR. 10 CL I submittal
- CPS-A/CPA-A CW UBD ARR. 10 CL I submittal
- CPS-A/CPA-A CCW UBD ARR. 10 CL I submittal
- CPS-A/CPA-A CW TAU ARR. 10 CL I submittal
- CPS-A/CPA-A CCW TAU ARR. 10 CL I submittal
- CPS-A/CPA-A CW TAD ARR. 10 CL I submittal
- CPS-A/CPA-A CCW TAD ARR. 10 CL I submittal
- CPS-A/CPA-A CW DBD ARR. 10 CL I submittal
- CPS-A/CPA-A CCW DBD ARR. 10 CL I submittal
- CPS-A/CPA-A CW BAD ARR. 10 CL I submittal
- CPS-A/CPA-A CCW BAD ARR. 10 CL I submittal
- CPS-A/CPA-A CW TH ARR 10 CL I submittal
- CPS-A/CPA-A CCW THD ARR. 10 CL I submittal
- CPS-A/CPA-A CW BHD ARR. 10 CL I submittal
- CPS-A/CPA-A CCW BHD ARR. 10 CL I submittal
- CPS-A/CPA-A CW BAU ARR. 10 CL I submittal
- CPS-A/CPA-A CCW BAU ARR. 10 CL I submittal
- CPS-A/CPA-A CW UBD ARR. 10 CL I submittal
- CPS-A/CPA-A CCW UBD ARR. 10 CL I submittal
- CPS-A/CPA-A CW TAU ARR. 10 CL I submittal
- CPS-A/CPA-A CCW TAU ARR. 10 CL I submittal
- CPS-A/CPA-A CW TAD ARR. 10 CL I submittal
- CPS-A/CPA-A CCW TAD ARR. 10 CL I submittal
- CPS-A/CPA-A CW DBD ARR. 10 CL I submittal
- CPS-A/CPA-A CCW DBD ARR. 10 CL I submittal
- CPS-A/CPA-A CW BAD ARR. 10 CL I submittal
- CPS-A/CPA-A CCW BAD ARR. 10 CL I submittal
- CPFB CW THD submittal
- CPFB CCW THD submittal
- CPFB CW BHD submittal
- CPFB CCW BHD submittal
- CPFB CW BAU submittal
- CPFB CCW BAU submittal
- CPFB CW UBD submittal
- CPFB CCW UBD submittal
- CPFB CW TAU submittal
- CPFB CCW TAU submittal
- CPFB CW TAD submittal
- CPFB CCW TAD submittal
- CPFB CW DBD submittal
- CPFB CCW DBD submittal
- CPFB CW BAD submittal
- CPFB CCW BAD submittal
- CPFD CW THD submittal
- CPFD CCW THD submittal
- CPFD CW BHD submittal
- CPFD CCW BHD submittal
- CPFD CW BAU submittal
- CPFD CCW BAU submittal
- CPFD CW UBD submittal
- CPFD CCW UBD submittal
- CPFD CW TAU submittal
- CPFD CCW TAU submittal
- CPFD CW TAD submittal
- CPFD CCW TAD submittal
- CPFD CW DBD submittal
- CPFD CCW DBD submittal
- CPFD CW BAD submittal
- CPFD CCW BAD submittal
- INLET Companion Flange submittal
- Flanged INLET submittal
FanDrafter files
CPV- Internal - CA,CF,CPV,CPS,CPA,CIC,CPL (dwg)
- External - CA,CP,CPV,CPS,CPA,CIC,SQI,SQN (dwg)
- CPV CW THD (NTS) (dwg)
- CPV CCW THD (NTS) (dwg)
- CPV CW BHD (NTS) (dwg)
- CPV CCW BHD (NTS) (dwg)
- CPV CW BAU (NTS) (dwg)
- CPV CCW BAU (NTS) (dwg)
- CPV CW UBD (NTS) (dwg)
- CPV CCW UBD (NTS) (dwg)
- CPV CW TAU (NTS) (dwg)
- CPV CCW TAU (NTS) (dwg)
- CPV CW TAD (NTS) (dwg)
- CPV CCW TAD (NTS) (dwg)
- CPV CW DBD (NTS) (dwg)
- CPV CCW DBD (NTS) (dwg)
- CPV CW BAD (NTS) (dwg)
- CPV CCW BAD (NTS) (dwg)
- Internal - CA,CF,CPV,CPS,CPA,CIC,CPL (dwg)
- External - CA,CP,CPV,CPS,CPA,CIC,SQI,SQN (dwg)
- Grease Terminator 2 - CPS/CPA (NTS) (dwg)
- Internal - CA,CF,CPV,CPS,CPA,CIC,CPL (dwg)
- External - CA,CP,CPV,CPS,CPA,CIC,SQI,SQN (dwg)
- Grease Terminator 2 - CPS/CPA (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CW THD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CCW THD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CW BHD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CCW BHD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CW BAU (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CCW BAU (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CW UBD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CCW UBD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CW TAU (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CCW TAU (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CW TAD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CCW TAD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CW DBD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CCW DBD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CW BAD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CCW BAD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CW THD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CCW THD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CW BHD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CCW BHD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CW BAU (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CCW BAU (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CW UBD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CCW UBD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CW TAU (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CCW TAU (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CW TAD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CCW TAD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CW DBD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CCW DBD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CW BAD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CCW BAD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CW THD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CCW THD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CW BHD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CCW BHD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CW BAU (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CCW BAU (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CW UBD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CCW UBD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CW TAU (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CCW TAU (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CW TAD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CCW TAD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CW DBD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CCW DBD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CW BAD (NTS) (dwg)
- CPS-A/CPA-A/CPS-CPA CCW BAD (NTS) (dwg)
- CPFB CW THD (NTS) (dwg)
- CPFB CCW THD (NTS) (dwg)
- CPFB CW BHD (NTS) (dwg)
- CPFB CCW BHD (NTS) (dwg)
- CPFB CW BAU (NTS) (dwg)
- CPFB CCW BAU (NTS) (dwg)
- CPFB CW UBD (NTS) (dwg)
- CPFB CCW UBD (NTS) (dwg)
- CPFB CW TAU (NTS) (dwg)
- CPFB CCW TAU (NTS) (dwg)
- CPFB CW TAD (NTS) (dwg)
- CPFB CCW TAD (NTS) (dwg)
- CPFB CW DBD (NTS) (dwg)
- CPFB CCW DBD (NTS) (dwg)
- CPFB CW BAD (NTS) (dwg)
- CPFB CCW BAD (NTS) (dwg)
- CPFD CW BAU (NTS) (dwg)
- CPFD CCW BAU (NTS) (dwg)
- CPFD CW UBD (NTS) (dwg)
- CPFD CCW UBD (NTS) (dwg)
- CPFD CW TAU (NTS) (dwg)
- CPFD CCW TAU (NTS) (dwg)
- CPFD CW TAD (NTS) (dwg)
- CPFD CCW TAD (NTS) (dwg)
- CPFD CW DBD (NTS) (dwg)
- CPFD CCW DBD (NTS) (dwg)
- CPFD CW BAD (NTS) (dwg)
- CPFD CCW BAD (NTS) (dwg)
- CPFD CW THD (NTS) (dwg)
- CPFD CCW THD (NTS) (dwg)
- CPFD CW BHD (NTS) (dwg)
- CPFD CCW BHD (NTS) (dwg)
View Products
Access catalogs, manuals, submittals, & typical specs, features, dimensions and more.
- By type lab exhaust, prop wall...
- By model AVA, CAC, DB ...
- By Express 24 hour customization
- By serial# located on product
- By image every product visually
- By publications Catalogs, manuals...
Find Your Rep
COOK reps are some of the best trained ventilation consultants in the business.
They provide application information, pricing, availability and product literature for Cook equipment.
They also offer factory / office tours.
Download Design Tools
COOK's Compute-A-Fan® Suite includes: selection software, FanDrafter software, Psychrometric Analysis software, Revit® files, and a Revit® MEP add-in.
© Copyright LOREN COOK COMPANY. All rights reserved.
Contact Employment
